| Resloved | ID | Status | Description |
| 20080717 | 675 | Completed | Validate the SolidWorks menu exists and functions |
| 20080717 | 674 | Completed | Validate SolidWorks Addin |
| 20080717 | 673 | Completed | Categories |
| 20080717 | 672 | Completed | Hide Format From the User Selection |
| 20080717 | 671 | Completed | Rename - Automatice Rename Configuration Only |
| 20080717 | 670 | Completed | Rename - Automatic Rename File and Configuration |
| 20080717 | 669 | Completed | Rename - Automatic Rename File Only |
| 20080717 | 668 | Completed | Rename - Prompt the User |
| 20080717 | 667 | Completed | Give each configuration The Same ID (UD-Congfig Name) Suffix |
| 20080717 | 666 | Completed | Give each configuration The Same ID (UD-Congfig Name) Prefix |
| 20080717 | 665 | Completed | Give each configuration a Unique ID |
| 20080717 | 664 | Completed | Add Suffix to the Second drawing |
| 20080717 | 663 | Completed | Add Suffix to the First drawing |
| 20080717 | 662 | Completed | Validate the Suffix Separator |
| 20080717 | 661 | Completed | Check the Drawing Number Follows component option |
| 20080717 | 660 | Completed | Prompt User for format for drawings |
| 20080717 | 659 | Completed | Check the Use Generic File Name option |
| 20080717 | 658 | Completed | Check the Allow Number Change and set to Description Only |
| 20080717 | 657 | Completed | Check the Allow Number Change and set to Number Only |
| 20080717 | 656 | Completed | Check the Allow Number Change and set to BOTH |
| 20080717 | 655 | Completed | Check the Use Category option and run test |
| 20080717 | 654 | Completed | Edit and Validate the Folder Path |
| 20080717 | 653 | Completed | Edit Prompt User for Path option |
| 20080717 | 652 | Completed | Edit Use Category Maker Folder Path option |
| 20080717 | 651 | Completed | Validate all tables exist in the database |
| 20080717 | 650 | Completed | Edit Match AutoNumber option |
| 20080717 | 649 | Completed | DBTools as Client |
| 20080717 | 648 | Completed | DBTools as Server |
| 20080717 | 647 | Completed | DBTools as Individual |
| 20080506 | 962 | Fixed | Numeric values display as dates in the BOM table. |
| 20080428 | 980 | Completed | Add a script to number an existing assembly. |
| 20080421 | 919 | Completed | Add support for Windows 64bit operating systems. |
| 20080408 | 961 | Fixed | Count property is not availabe from COM. |
| 20080331 | 960 | Fixed | Ownsership is null on new ECO's |
| 20080326 | 959 | Fixed | Remove Requery per MechWorks recommendation. |
| 20080319 | 958 | Fixed | Variant note script that fail cause DBWorks to leave the drawing sheet in edit mode. |
| 20080319 | 869 | Fixed | The DBTools installation causes the DBWorks installation to stop running. |
| 20080314 | 957 | Completed | Update the EC application to use the .NET zip feature avoiding the DBWorks zip application. |
| 20080311 | 956 | Fixed | Past revisions are updated when creating a new revision using the MoveRevisionTo api. |
| 20080228 | 939 | Fixed | The AutoNumber fails to open when it contains exactly one format. |
| 20080228 | 938 | Completed | The DataEntr.lst does not output parameters when the value is empty. |
| 20080226 | 935 | Fixed | Closing the DBTools leaves DBWAlone running and crashes. |
| 20080226 | 934 | Completed | Add an API call to check if a document is referenced by other opened documents. |
| 20080226 | 933 | Fixed | Renaming a component with multiple drawings fails to provide the correct drawing suffix. |
| 20080225 | 936 | Deferred | The installation copies the addins to the DBInventor and DBWAlone, but they are not supported. |
| 20080220 | 932 | Fixed | Renaming the "As Machined" configuration does not update the "As Welded" when both are managed. |
| 20080219 | 931 | Completed | Add support for vbscript to access the SolidWorks Document Manager from the DBTools. |
| 20080219 | 930 | Fixed | Renaming the "As Machined" configuration record fails to update the "As Machined" configuration. |
| 20080219 | 927 | Fixed | The last format selection is not automatically selected during the next save operation. |
| 20080218 | 929 | Fixed | As Welded configurations are given a new number when the DBWorks option "Save only 1st level configurations" is enabled. |
| 20080215 | 928 | Fixed | Dataentr_generic.lst fails to create a directory and save files. |
| 20080215 | 924 | Completed | Add the parameter AutoNumberIndex to the DataEntr_Custom.lst |
| 20080215 | 923 | Completed | Add support for line numbers in the trace log file. |
| 20080215 | 922 | Completed | Add support to the AutoNumber to multi-level "rolling" folder numbers. |
| 20080206 | 921 | Fixed | Balloon number do not update to match the related item in SolidWorks 2008. |
| 20080114 | 871 | Completed | Add support to the TreeToFileSystemComparison report to check all documents. |
| 20080111 | 870 | Fixed | Using the MoveRevisionTo API causes the original and new revision created by to update. |
| 20080110 | 868 | Fixed | Deleting an item from the report tree causes an error. |
| 20080110 | 867 | Fixed | NvarChar(MAX) fails when creating a table in SQL 2000 |
| 20070706 | 716 | Completed | Add support to capture a revision for a child document. |
| 20070706 | 714 | Fixed | ECO ApproveTo does not update the Parent/Child reference revision field. |
| 20070706 | 698 | Fixed | When a drawing is selected for approval an error occurs. |
| 20070706 | 552 | Fixed | Save As of a registered SolidWorks component causes the original component's active config to be renamed to the save as id. |
| 20070706 | 342 | Cut | DBNotification - allow the user to see all messages via forward and back buttons. |
| 20070705 | 755 | Fixed | Copied From fields are empty after ADW. |
| 20070705 | 727 | Obsolete | Show generic table build progress to user. |
| 20070705 | 726 | Completed | Update the generic table options to speed insert and rebuild operations. |
| 20070705 | 722 | Completed | Add support for DBWorks Addin |
| 20070705 | 718 | Obsolete | Allow the user to format any date field. |
| 20070705 | 644 | Completed | Add a dialog if the AutoNumber does not have any formats. |
| 20070705 | 641 | Completed | Add support for approving all children of an ECO when the ECO is approved. |
| 20070705 | 638 | Deferred | A document revision is not assigned to the ECO on approval. |
| 20070705 | 550 | Completed | Add support for a category description separator character. |
| 20070705 | 524 | Completed | Add an EC Archive binder and move any complete items here when complete. |
| 20070705 | 389 | Completed | DBRevTable - if the query rows are empty then run a select * statement |
| 20070705 | 376 | Completed | Workflow - add the SQL Reports to the DBWorks tab area |
| 20070705 | 375 | Completed | Workflow - add a DBWorks option to support Engineering Change visibility |
| 20070705 | 330 | Completed | Workflow - Allow the user to view messages in a report from the DBTools. |
| 20070705 | 329 | Completed | Workflow - Add a user option to "hold" popup messages until they are closed by the user. |
| 20070705 | 327 | Completed | Workflow - Complete the "popup" notification application. |
| 20070705 | 26 | Completed | Add menu to Stand-Alone, AutoCAD, Word, Excel, ect... |
| 20070705 | 242 | Completed | Added support to the DBWorkItems for a sorted ECO list. |
| 20070705 | 142 | Fixed | DBTools tables do not always default to dbo |
| 20070705 | 133 | Completed | Add a set of tools to Defer check-in/approval. |
| 20070702 | 744 | Fixed | The description is missing from the EC list dialog. |
| 20070702 | 735 | Deferred | SolidWorks is opened each time the notification checks for messages |
| 20070702 | 696 | Deferred | When the AutoNumber is set to File Count In Folder and the Folder Format is 1 a crash occurs. |
| 20070702 | 680 | Deferred | The ApproveTo function does not correctly handle configuration tree and image files. |
| 20070622 | 645 | Fixed | A newly added format is not selected and instead selects the first format in the list. |
| 20070621 | 743 | Fixed | The AutoNumber DBWCust ODBC check occurs when categories are not used. |
| 20070621 | 539 | Fixed | Newly added AutoNumber format is not selectable. |
| 20070620 | 742 | Fixed | AutoNumber was not reading the category wizard settings. |
| 20070619 | 741 | Fixed | General table can not be inserted into a SolidWorks drawing template. |
| 20070619 | 737 | Fixed | Renaming a component with a parent in the new state is not allowed. |
| 20070619 | 733 | Fixed | General table dates do not follow the DBWorks date format. |
| 20070619 | 357 | Fixed | RevTable - update the date values to be formatted to match the option Drawings > Data format for variant note |
| 20070605 | 738 | Fixed | Revision Move_To function fails to refresh database and update approval_date |
| 20070524 | 725 | Completed | Add support to "retarget" a drawing during the save as process. |
| 20070522 | 736 | Fixed | The DataEntr.lst does not clear the dbwscrpt.out file before exiting. |
| 20070521 | 734 | Fixed | OnAddDocument.lst never increments CallCount on second call |
| 20070509 | 729 | Fixed | When an EC is approved the date and user are not stored. |
| 20070220 | 634 | Completed | Add support to approve a revision to the next value (example A.3 to B). |
| 20070220 | 633 | Completed | Add another EC state option called Closed which obsoletes the EC. |
| 20070220 | 631 | Fixed | Rejecting an EC locks the item in a rejected state. |
| 20070214 | 547 | Deferred | Deleting a format causes Add Format to fail until the application is closed. |
| 20070214 | 538 | Fixed | Adding/removing a binder causes an exception. |
| 20070213 | 642 | Fixed | DataEntr.lst is not correctly writing all parameters before the second DataEntr_Custom.lst call. |
| 20070201 | 551 | Fixed | Refreshing a drawing with a revision table causes an error. |
| 20070201 | 549 | Fixed | BOM insert and refresh is slow due to several trips to the database. |
| 20070201 | 528 | Completed | Add support for a global set of objects to be referenced across memory locations |
| 20070130 | 548 | Completed | Add an option to hide a number format from the user for API use only. |
| 20070126 | 546 | Fixed | Dataentr_Custom.lst is not passed the correct parameters during the post-event. |
| 20070126 | 542 | Fixed | The DBTools application is not correctly registered on installation. |
| 20070126 | 537 | Fixed | The AutoNumber right-click menu is not displayed correctly when running from the DBTools UI. |
| 20070122 | 540 | Fixed | DBTools.exe crashes when a connection to the database fails, reconnecting resolves the issue. |
| 20070117 | 534 | Fixed | The AutoNumber format list does not retain the selected value and does not open from the SolidWorks menu. |
| 20070116 | 420 | Fixed | DBBOM - The balloons are not displayed correctly in SolidWorks 2006 SP 5.0 and greater. |
| 20070115 | 533 | Fixed | Saving a second drawing for a multiple configuration model with id's like 1234 (config) causes the second drawing to replace the first. |
| 20070115 | 532 | Fixed | DBTools addin dialog is not displaying any of the addin applications. |
| 20070112 | 531 | Fixed | Using the up/down key to navigate the AutoNumber options UI fails to update the options display. |
| 20070112 | 530 | Fixed | The AutoNumber Options UI is slow to update due to a performance issue with the sample full path. |
| 20070111 | 529 | Completed | Update the DBTools to create/manage all addin applications. |
| 20070110 | 522 | Deferred | An ERN should not be possible until the document has been moved to the first major as a non-approved. |
| 20070110 | 374 | Completed | Workflow - Add archive support |
| 20070109 | 525 | Fixed | When a document is added to an EC from the OnNewRev.lst the revision shows the last not the current. |
| 20061227 | 515 | Completed | Add a set of Binders to better manage many formats. |
| 20061226 | 514 | Fixed | Selecting Refresh for a Balloon only linked BOM fails. |
| 20061226 | 513 | Fixed | Deleting an inserted BOM causes the refresh to fail. |
| 20061221 | 332 | Completed | Workflow - Update the AutoNumber to handle EC numbering. |
| 20061220 | 449 | Fixed | DBTools - scripting options are always set regardless of the selected addins. |
| 20061215 | 448 | Fixed | DBAutoNumber - when rename configuration only is selected the Description is not updated. |
| 20061215 | 447 | Fixed | DBAutoNumber - Weldment configurations are not managed or named correctly. |
| 20061214 | 446 | Fixed | DBAutoNumber - OnAddDocument_Custom.lst does not function like the DataEntr_Custom.lst |
| 20061129 | 437 | Fixed | DBAutoNumber - Changes made to the options are not saved. |
| 20061127 | 435 | Fixed | DBTools - The Options menu item was not enabled. |
| 20061124 | 434 | Fixed | DBTools - Numeric values like 1.00 are converted to 1 when displayed in tables. |
| 20061121 | 433 | Completed | DBAutoNumber - Add an option to always use a selected format to reduce the appearance of the format list. |
| 20061116 | 426 | Fixed | AutoNumber - When a non-managed SolidWorks configuration is renamed to managed the config and record name become mis-aligned. |
| 20061115 | 428 | Fixed | DBBOM - When .Default is present in the Make_Buy.lst the dialog will not open. |
| 20061115 | 427 | Fixed | RevTable - The DBWorks field list is adding the same field multiple times after each open of the template editor. |
| 20061115 | 425 | Fixed | DBBOM - the application stops when a dangling balloon exists leaving the property manager open. |
| 20061113 | 423 | Completed | DBAutoNumer - update the DataEntr.lst to call the DataEntr_Custom.lst before and after. |
| 20061113 | 419 | Completed | DBRevTable - Add a set of sample templates to the installation. |
| 20061113 | 377 | Completed | AutoNumber - update the connections to be driven by a config file. |
| 20061113 | 23 | Completed | Add Administrator option to export/import AutoNumber data to/from xml file |
| 20061110 | 408 | Completed | RevTable - add support for revision balloons. |
| 20061109 | 422 | Fixed | DBBOM - inserting a BOM fails when database authentication is not set to NT. |
| 20061109 | 421 | Fixed | DBBOM - Parts not in the BOM, but do have a parent, display ? for the balloon. |
| 20061108 | 418 | Fixed | DBTools - The BOM and RevTable incorrectly adjust columns smaller then expected causing text to wrap. |
| 20061108 | 299 | Fixed | DBTools causes a memory leak when the menu and toolbar images are used. |
| 20061103 | 416 | Fixed | DBTools - The DBWarm options were not always applied to the SolidWorks menu. |
| 20061103 | 344 | Completed | SolidWorks 2007 - Test the DBTools against the latest release of SolidWorks. |
| 20061101 | 400 | Fixed | AutoNumber - The AutoNumber is slow when a large number of document exist in the Document table. |
| 20061101 | 343 | Fixed | DBTools - The Client installation fails when the Microsoft .NET Framework 2.0 Configuration is not present. |
| 20061031 | 399 | Fixed | AutoNumber - The option to Allow Number Change is disabled when Match AutoNumber is selected. |
| 20061031 | 396 | Fixed | DBRevTable - When no records are found during the insert a blank table with headers should be added. |
| 20061031 | 394 | Fixed | AutoNumber - the xml export options fails if the folder XML does not exist. |
| 20061031 | 386 | Fixed | DBBOM and RevTable - Add an option to not have the table anchored when inserted. |
| 20061031 | 287 | Fixed | DataEntr_Generic.lst does not default to the project to save to the same as the OnAddDocument.lst or DataEntr.lst |
| 20061030 | 398 | Fixed | AutoNumber - The project was not set correctly in the Category Wizard when saving from Excel. |
| 20061030 | 397 | Fixed | DBBOM - when Document.UM was used instead of UM the field was not populated. |
| 20061019 | 393 | Fixed | AutoNumber - The dataentr.lst is called twice when using the ADRW. |
| 20061019 | 392 | Completed | AutoNumber - Add OnAddDocument_Custom.lst call after the OnAddDocument.lst is complete. |
| 20061018 | 390 | Fixed | DBRevTable - Error finding Document Unique ID message appears when the option to use model is not checked. |
| 20061018 | 347 | Fixed | The DBBOM and DBRevision table Option menus are only accessable when a drawing is opened. |
| 20061018 | 346 | Fixed | The DBBOM and DBRevTable Insert menu option is disabled when the table is deleted but the variant note stil exists. |
| 20060905 | 345 | Fixed | DBBOM - Update the BOM to rebuild faster. |
| 20060831 | 100 | Deferred | Log file is missing an unindent statement that causes the lines to extend further to the right then expected. |
| 20060824 | 83 | Completed | On installation allow the user to select which items get installed. |
| 20060824 | 339 | Fixed | AutoNumber - Validate the DBWCust ODBC is properly connected otherwise the scripting will fail during a save. |
| 20060824 | 326 | Fixed | AutoNumber - Renaming a part with a linked drawing doesn't work |
| 20060824 | 323 | Fixed | AutoNumber sequential configuration number adds () to config name. |
| 20060824 | 319 | Fixed | The AutoNumber configuration save always places () around the config name. |
| 20060824 | 291 | Deferred | The AutoNumber is causing some issue when saving documents. |
| 20060824 | 247 | Completed | Allow generic items to keep the same file name on drag and drop when using AutoNumber. |
| 20060823 | 337 | Fixed | DBTools - When the DBTools addin for SolidWorks is enabled the DBWorks options file is locked. |
| 20060823 | 325 | Fixed | The AutoNumber format dialog is not updating the preview correctly. |
| 20060823 | 318 | Fixed | The DBBOM is placing/reading the options in the local installation folder which should be the network. |
| 20060823 | 317 | Fixed | The DBBOM is not reading and applying the options to balloons correctly. |
| 20060823 | 280 | Fixed | The DBWorks Tools menu is not removed when the addin is disabled. |
| 20060823 | 277 | Fixed | DBTools > BOM > Refresh... is available to the user when a bom does not exist in the drawing. |
| 20060823 | 276 | Fixed | DBTools > BOM > Insert... is available to the user when a bom already exists in the drawing. |
| 20060818 | 264 | Completed | Add support for AutoCAD documents. |
| 20060809 | 313 | Fixed | The DBTools commands are all disabled when DBWarm is not enabled. |
| 20060809 | 312 | Completed | Update the AutoNumber to support the current name of generic during drag/drop. |
| 20060808 | 310 | Fixed | The OnAddDocument.lst is incorrectly checking for a file and failing to add an new document. |
| 20060630 | 279 | Fixed | The DBWorks Tools addin has a memory leak that cause SolidWorks to consume 500k per second until the max is reached. |
| 20060629 | 275 | Fixed | The OnBOMItem.lst is getting called after the column resize leaving the column much wider then the text. |
| 20060627 | 271 | Completed | Update DataEntr_Generic.lst to support Word and Excel. |
| 20060626 | 269 | Fixed | The DBBOM sizes columns larger then required for the text to fit. |
| 20060620 | 262 | Completed | Add support for DBWarm options. |
| 20060619 | 261 | Completed | If the DBTools are installed into the DBWorks_Server folder (\DBWorks_Server\DBTools) don't prompt the client for an installation path. |
| 20060619 | 260 | Completed | Add support for a Server installation from a Client onto a mapped drive. |
| 20060616 | 258 | Fixed | Some installations have errors when using the DBBOM due to a missing ADODB.dll |
| 20060615 | 67 | Completed | Add support for network installation like SolidWorks |
| 20060615 | 24 | Completed | Add error/trace output to text log |
| 20060614 | 248 | Completed | Add support for a client to run the DBTools over a mapped drive. |
| 20060609 | 250 | Fixed | All of the DBBOM menu commands fail to function. |
| 20060609 | 245 | Completed | Add an option to AutoNumber to define whether the user can change the ID and/or Description when prompt user is enabled. |
| 20060608 | 244 | Fixed | The AutoNumber prompts the user to select categories before selecting a format when there are not any linked categories. |
| 20060605 | 96 | Deferred | The Help button on the AutoNumber options does not open the help file when clicked. |
| 20060605 | 36 | Completed | When a new format is added to AutoNumber, copy the selected format. |
| 20060605 | 33 | Deferred | AutoNumber causes error when a metacategory is missing from the DBWCust database. |
| 20060605 | 32 | Deferred | SolidWorks API swBOMTable.SetHeader causes SolidWorks crash. |
| 20060605 | 25 | Completed | Add .NET 2.0 framework to setup.msi |
| 20060605 | 22 | Deferred | ADW calls AutoNumber in Inventor during duplication when Suffix is used |
| 20060605 | 205 | Deferred | DBTools installation causes an error when Client is selected. |
| 20060605 | 196 | Completed | When a metacategory does not exists prompt the user to add one. |
| 20060603 | 233 | Deferred | This is a test bug to verify the Automated notification. |
| 20060603 | 231 | Fixed | The AutoNumber is failing to add tables to a new installation. |
| 20060602 | 86 | Completed | When loggin is enabled added an icon to the application header to notify the user. |
| 20060602 | 85 | Completed | Add button to open log on the About form. |
| 20060602 | 84 | Completed | Combine all options into a single user form. |
| 20060602 | 228 | Completed | Add a script to the DBBOM (OnBOMItem.lst) that is fired for each item in the BOM. |
| 20060602 | 217 | Completed | Test renaming a configuration record in DBWorks. |
| 20060602 | 134 | Completed | Add an AutoNumber option to "Allow user to change Number" |
| 20060531 | 221 | Fixed | AutoNumber renaming is not working when managing configurations. |
| 20060525 | 216 | Completed | Change the ChangeNumber dialog to support DBWorks user interface localization. |
| 20060524 | 215 | Completed | Change the ChangeNumber header to display the selected format description. |
| 20060524 | 198 | Fixed | The DBTools is not updating the DBWapp.par on installations. |
| 20060522 | 208 | Fixed | The DBTools > AutoNumber menu was opening the BOM options. |
| 20060522 | 207 | Fixed | The OnAddDocument.lst is not creating a new folder. |
| 20060522 | 206 | Fixed | The OnAddDocument.lst was referencing the current project, not the drop project on a drag/drop. |
| 20060522 | 197 | Fixed | Generic drag/drop causes error with only one AutoNumber format. |
| 20060522 | 194 | Deferred | The UM field in this BOM causes the BOM to stop writing leaving the table incomplete. |
| 20060522 | 176 | Fixed | Update the AutoNumber to support a file DSN and an encrypted DBWCONN.par |
| 20060518 | 204 | Fixed | The user is not required to enter a description in the Change Number dialog. |
| 20060518 | 203 | Fixed | Selecting Cancel on the Change Number dialog of AutoNumber causes a second save dialog to open incorrectly. |
| 20060516 | 202 | Deferred | With the AutoNumber options set to give a component configuration a unique id the DBWorks record was not updated giving the record a different config value. |
| 20060516 | 201 | Deferred | The Allow Number Change option is not functioning for generic drag/drop. |
| 20060516 | 200 | Deferred | The autonumber options do not allow a user to manually enter the file path. |
| 20060516 | 199 | Deferred | When saving a SolidWorks component the configuration name is not updated to match the autonumber. |
| 20060515 | 27 | Deferred | AutoNumber only supports writing when in UI mode, this makes the application read-only. |
| 20060515 | 190 | Deferred | The DBTools desktop short-cut is not getting added on installation. |
| 20060515 | 143 | Deferred | The SolidWorks custom manager still reads DBWBOM instead of BOM. |
| 20060512 | 87 | Deferred | OnAddDocument.lst fails when using the drag/drop |
| 20060512 | 195 | Fixed | OnAddDocument.lst is moving registered documents. |
| 20060512 | 193 | Deferred | The OnNewNumber.lst is not functioning correctly. |
| 20060512 | 192 | Deferred | Users are getting prompted for a format when saving a drawing when the option Prompt User For Format is disabled. |
| 20060512 | 191 | Fixed | AutoNumber format select causes a crash when ever a text value is entered in the AutoNumber Format field. |
| 20060512 | 135 | Deferred | AutoNumber use categories option would remain checked incorrectly. |
| 20060512 | 129 | Fixed | The autonumber leaves unused linked categories in the database. |
| 20060512 | 126 | Deferred | DBTools installation is failing to complete AutoNumber and par updates. |
| 20060509 | 182 | Fixed | The right-click menu was disable in the AutoNumber categories area. |
| 20060509 | 181 | Fixed | The DataEntr.lst was not selecting the correct format when linked categories were used. |
| 20060505 | 175 | Fixed | A format was not selected when the AutoNumber options dialog opened. |
| 20060505 | 174 | Fixed | Unchecking a Linked Category caused the AutoNumber options to crash. |
| 20060404 | 140 | Completed | Create a set of SQL reports related to DBWorks |
| 20060330 | 127 | Fixed | Selecting Cancel on the autonumber format dialog does not cancel the save. |
| 20060329 | 82 | Fixed | When using the DataEntr.lst to save a drawing that does not have an inserted view the script failes. |
| 20060329 | 128 | Fixed | Saving a drawing with a component incorrectly causes a dialog to notify the user that a component was not inserted |
| 20060328 | 88 | Completed | Add a configuration tab to the AutoNumber options. |
| 20060328 | 124 | Fixed | Linked categories are not saved when using right-click > select all children |
| 20060328 | 123 | Fixed | AutoNumber is not returning true when linked categories are present. |
| 20060328 | 122 | Fixed | User can select linked categories when the option to use categories has been disabled. |
| 20060328 | 121 | Fixed | DataEntr.lst is not getting copied to DBWorks LST folder on installation. |
| 20060327 | 119 | Fixed | AutoNumber drawing options are not set correctly per format. |
| 20060327 | 118 | Fixed | AutoNumber drawing check options do not enable/disable sub-features correctly. |
| 20060327 | 117 | Fixed | AutoNumber options failed to open and set properly |
| 20060320 | 103 | Fixed | BOM Table does not refresh after insert. |
| 20060315 | 102 | Completed | AutoNumber options are slow. Try using data binding to the data layer for better performance. |
| 20060314 | 101 | Fixed | AutoNumber crashes when the Auto Number Format field is modified. |
| 20060313 | 99 | Fixed | AutoNumber fails during new number or sample number requests. |
| 20060313 | 94 | Fixed | AutoNumber, linked categories area, right-click menus are not displayed. |
| 20060313 | 66 | Fixed | Drawing of Part-to-part relationship causes the DBWBOM to fail if structure is not refreshed. |
| 20060313 | 65 | Fixed | Balloons on an inserted part (part-to-part drawing) reference the parent part, should reference the underlying part. |
| 20060313 | 47 | Fixed | Part-to-Part relationships cause the DBWBOM and/or balloons to fail. |
| 20060313 | 38 | Fixed | AutoNumber does not call the OnNewNumber.lst when requesting a new number. |
| 20060312 | 98 | Fixed | AutoNumber linked categoies were not properly selected when the form is first displayed. |
| 20060312 | 97 | Fixed | The About box is still displaying DBWorks tools, change this to DBTools. |
| 20060312 | 95 | Fixed | AutoNumber options, category expand and collapse buttons do not have an image. |
| 20060312 | 93 | Fixed | AutoNumber options, Linked Categories when selecting or unselecting a category the parent/children ar not updating. |
| 20060310 | 92 | Fixed | Installation causes the Par file to be deleted. |
| 20060310 | 91 | Fixed | DBWorks 2006 beta 20060309 caused multiple calls to the same BOM to fail after the first. |
| 20060310 | 90 | Fixed | Inserting a BOM more then once in a drawing fails. |
| 20060310 | 37 | Fixed | On installation copy the BOM anchor images to the proper DBWorks/DBInventor folder. |
| 20060310 | 19 | Fixed | BOM does not support bom's/balloons on multiple sheets. |
| 20060309 | 89 | Fixed | The BOM template dialog was not displaying when selected from SolidWorks. |
| 20060309 | 35 | Fixed | Deleting an AutoNumber format cause additional changes to fail on save. |
| 20060309 | 20 | Fixed | When components are light-weight the BOM application sometimes stops updating. |
| 20060309 | 18 | Fixed | Light-weight components with balloons turn to ? until resolved in the BOM. |
| 20060309 | 16 | Fixed | BOM fails when a single-quote exists in folder or file name |
| 20060303 | 39 | Completed | Test associated workitem on checkin |